View PS7801M-1A_8034881.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2007, 2009 43 12 1. led anode 2. led cathode 3. mos fet 4. mos fet pin connection (top view) the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. description the PS7801M-1A is a low output capacit ance solid state relay containing a gaas led on the light emitting side (input side) and mos fets on the output side. an ultra small flat-lead package has been provided whic h realizes a reduction in mounting area of about 50% compared with the ps72xx series. it is suitable for high-frequency signal control, due to its low c r (3.4 pf ? ? ), low output capacitance, and low off- state leakage current. features ? ultra small flat-lead package (4.2 (l) 2.5 (w) 1.85 (h) mm) ? low c r (c r = 3.4 pf ? ? ) ? low output capacitance (c out = 0.95 pf typ.) ? 1 channel type (1 a output) ? designed for ac/dc switching line changer ? low offset voltage ? ordering number of taping product: PS7801M-1A-f3: 3 500 pcs/reel ? pb-free product ? safety standards ? ul approved: no. e72422 applications ? measurement equipment 4-pin ultra small flat-lead, low c r (3.4 pf ? ? ) 1-ch optical coupled mos fet solid state relay ocmos fet PS7801M-1A document no. pn10691ej03v0ds (3rd edition) date published may 2009 ns ? nepoc series ?
package dimensions (unit: mm) 3.6 +0.3 ?0.4 2.50.3 4 3 12 n 4.20.2 0.2 max. 0.20.1 3.0 max. 1.27 1.850.05 0.40.1 0.15 +0.1 ?0.05 0.20.1 0.36 4.60.2 marking example 901 9 n 01 assembly lot week assembled year assembled no.1 pin mark (nicked corner) an initial of "nec" (marking details) last number of type no. : 1m *1 *2 *1 the marking corresponds to the last two digits of the part number below. PS7801M-1A *2 bar : pb-free 1m data sheet pn10691ej03v0ds 2 PS7801M-1A
ordering information part number order number solder plating specification packing style safety standard approval application part number *1 PS7801M-1A PS7801M-1A-a pb-free 50 pcs (tape 50 pcs cut) standard products PS7801M-1A PS7801M-1A-f3 PS7801M-1A-f3-a embossed tape 3 500 pcs/reel (ul approved) *1 for the application of the safety stan dard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 5.0 v power dissipation p d 50 mw peak forward current *1 i fp 1 a mos fet break down voltage v l 20 v continuous load current i l 160 ma pulse load current *2 (ac/dc connection) i lp 240 ma power dissipation p d 250 mw isolation voltage *3 bv 500 vr.m.s. total power dissipation p t 300 mw operating ambient temperature t a ? 40 to +85 c storage temperature t stg ? 40 to +100 c *1 pw = 100 s, duty cycle = 1% *2 pw = 100 ms, 1 shot *3 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-2 shorted together, 3-4 shorted together. recommended operating conditions (t a = 25 c) parameter symbol min. typ. max. unit led operating current i f 4.5 5 20 ma led off current i f 0.1 ma data sheet pn10691ej03v0ds 3 PS7801M-1A
electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 5 ma 1.1 1.4 v reverse current i r v r = 5 v 5.0 a mos fet off-state leakage current i loff v d = 20 v 0.03 0.25 na output capacitance c out v d = 0 v, f = 1 mhz, t 1 s 0.95 1.5 pf coupled led on-state current i fon i l = 160 ma 4 ma on-state resistance r on i f = 5 ma, i l = 160 ma, t 10 ms 3.6 5.0 ? turn-on time *1, 2 t on i f = 5 ma, v o = 5 v, r l = 500 ? , 0.05 0.25 ms turn-off time *1, 2 t off pw 0.5 ms 0.03 0.25 isolation resistance r i-o v i-o = 0.5 kv dc 10 9 ? isolation capacitance c i-o v = 0 v, f = 1 mhz 0.3 pf *1 test circuit for switching time pulse input input monitor monitor v o v l r l i f r in t on t off 10% 90% input 0 output v o = 5 v 50% *2 the turn-on time and turn-off time are specified as input-pulse width 0.5 ms. be aware that when the device operates with an input-pulse width less than 0.5 ms, the turn-on time and turn-off time will increase. data sheet pn10691ej03v0ds 4 PS7801M-1A
typical characteristics (t a = 25 c, unless otherwise specified) ?25 0 25 50 75 85 100 100 80 60 40 0 20 ?25 0 25 50 75 85 100 200 160 120 80 40 0 ambient temperature t a ( c) maximum forward current i f (ma) maximum forward current vs. ambient temperature applied voltage v d (v) output capacitance c out (pf) output capacitance vs. applied voltage 020 40 60 80 100 10 ?8 10 ?9 10 ?10 10 ?11 10 ?12 10 ?13 10 ?14 v d = 20 v ambient temperature t a ( c) off-state leakage current i loff (a) off-state leakage current vs. ambient temperature load current vs. load voltage load voltage v l (v) load current i l (ma) ambient temperature t a ( c) maximum load current i l (ma) maximum load current vs. ambient temperature 1 ma 5 ma 20 ma 30 ma i f = 50 ma 10 ma ?25 0 25 50 75 100 1.6 1.4 1.2 1.0 0.8 ambient temperature t a ( c) forward voltage v f (v) ambient temperature forward voltage vs. f = 1 mhz, t 1 s 5 10 15 20 25 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 i f = 5 ma ?1.0 ?0.4 ?0.6 ?0.8 ?0.2 0.2 0.4 0.6 0.8 1.0 0 200 150 100 50 ?50 ?100 ?150 ?200 remark the graphs indicate nominal characteristics. data sheet pn10691ej03v0ds 5 PS7801M-1A
?25 0 25 50 75 100 2.0 1.6 1.2 0.8 0.4 0 normalized to 1.0 at t a = 25 c, i f = 5 ma, i l = 160 ma ambient temperature t a ( c) normalized on-state resistance r on normalized on-state resistance vs. ambient temperature n = 50 pcs, i f = 5 ma, i l = 160 ma on-state resistance distribution number (pcs) on-state resistance r on ( ? ) turn-on time vs. forward current forward current i f (ma) turn-on time t on (ms) turn-off time vs. forward current forward current i f (ma) turn-off time t off (ms) turn-on time t on (ms) number (pcs) turn-on time distribution n = 50 pcs, i f = 5 ma, v o = 5 v, r l = 500 ?, pw = 0.5 ms turn-off time t off (ms) number (pcs) turn-off time distribution 5 15 20 25 10 0.60 0.50 0.40 0.30 0.20 0.10 0 v o = 5 v, r l = 500 ?, pw = 0.5 ms 5 15 20 25 10 0.5 0.4 0.3 0.2 0.1 0 v o = 5 v, r l = 500 ?, pw = 0.5 ms n = 50 pcs, i f = 5 ma, v o = 5 v, r l = 500 ?, pw = 0.5 ms 2.5 3.5 4.0 4.5 2.0 3.0 60 40 30 20 0 10 50 0.01 0.03 0.05 0.06 0.02 0.04 60 40 30 20 0 10 50 0.02 0.04 60 40 30 20 0 10 50 0.01 0.03 0.05 0.06 remark the graphs indicate nominal characteristics. data sheet pn10691ej03v0ds 6 PS7801M-1A
ambient temperature t a ( c) normalized turn-on time t on normalized turn-on time vs. ambient temperature ambient temperature t a ( c) normalized turn-off time t off normalized turn-off time vs. ambient temperature ?25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 normalized to 1.0 at t a = 25 c, i f = 5 ma, v o = 5 v, r l = 500 ?, pw = 0.5 ms ?25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 normalized to 1.0 at t a = 25 c, i f = 5 ma, v o = 5 v, r l = 500 ?, pw = 0.5 ms remark the graphs indicate nominal characteristics. data sheet pn10691ej03v0ds 7 PS7801M-1A
taping specifications (unit: mm) tape direction PS7801M-1A-f3 outline and dimensions (tape) outline and dimensions (reel) 1.550.05 4.00.1 2.00.05 4.00.1 1.750.1 2.9 max. 0.3 2.90.1 2.40.1 1.5 +0.1 ?0 5.30.1 5.50.05 12.00.2 nnnn packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 3302.0 1001.0 2.0 0.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 13.00.2 data sheet pn10691ej03v0ds 8 PS7801M-1A
recommended mount pad dimensions (unit: mm) 3.6 (0.35) 4.4 5.3 1.27 0.8 0.6 24-r0.1 ( ) : reference value remark all dimensions in this figure must be evaluated before use. data sheet pn10691ej03v0ds 9 PS7801M-1A
recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 220 c package surface temperature t ( c) time (s) (heating) to 10 s to 60 s 260 c max. recommended temperature profile of infrared reflow 12030 s (preheating) 180 c 120 c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperature of the package would not be heated over 100 c. (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. data sheet pn10691ej03v0ds 10 PS7801M-1A
usage cautions 1. protect against static el ectricity when handling. 2. avoid storage at a high temperature and high humidity. data sheet pn10691ej03v0ds 11 PS7801M-1A
the information in this document is current as of may, 2009. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. in addition, nec electronics products are not taken measures to prevent radioactive rays in the product design. when customers use nec electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of nec electronics products. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e0904e (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific": data sheet pn10691ej03v0ds 12 PS7801M-1A
caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth. PS7801M-1A

▲Up To Search▲

Price & Availability of PS7801M-1A

	To Download PS7801M-1A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .